Skip to main content
  • Berkeley Lab(link is external)
  • Energy Technologies Area(link is external)
Home
  • Join
  • About +
    • FAQs
    • Team Members
    • Partners
    • Participants
  • Resources +
    • Guidance Documents
    • Case Studies
    • Webinars
    • External Resources

Error message

There was a problem getting your available contact lists.

Emissions from electronic cigarettes: Assessing vapers’ intake of toxic compounds, secondhand exposures and the associated health impacts

Publication Type

Journal Article

Date Published

08/2017

Authors

Logue, Jennifer M., Mohamad Sleiman, V.Nahuel Montesinos, Marion L. Russell, Marta I. Litter, Neal L. Benowitz, Lara A. Gundel, Hugo Destaillats

DOI

10.1021/acs.est.7b00710(link is external)

Abstract

E-cigarettes likely represent a lower risk to health than traditional combustion cigarettes, but they are not innocuous. Recently reported emission rates of potentially harmful compounds were used to assess intake and predict health impacts for vapers and bystanders exposed passively. Vapers’ toxicant intake was calculated for scenarios in which different e-liquids were used with various vaporizers, battery power settings and vaping regimes. For a high rate of 250 puff day–1 using a typical vaping regime and popular tank devices with battery voltages from 3.8 to 4.8 V, users were predicted to inhale formaldehyde (up to 49 mg day–1), acrolein (up to 10 mg day–1) and diacetyl (up to 0.5 mg day–1), at levels that exceeded U.S. occupational limits. Formaldehyde intake from 100 daily puffs was higher than the amount inhaled by a smoker consuming 10 conventional cigarettes per day. Secondhand exposures were predicted for two typical indoor scenarios: a home and a bar. Contributions from vaping to air pollutant concentrations in the home did not exceed the California OEHHA 8-h reference exposure levels (RELs), except when a high emitting device was used at 4.8 V. In that extreme scenario, the contributions from vaping amounted to as much as 12 μg m–3 formaldehyde and 2.6 μg m–3 acrolein. Pollutant concentrations in bars were modeled using indoor volumes, air exchange rates and the number of hourly users reported in the literature for U.S. bars in which smoking was allowed. Predicted contributions to indoor air levels were higher than those in the residential scenario. Formaldehyde (on average 135 μg m–3) and acrolein (28 μg m–3) exceeded the acute 1-h exposure REL for the highest emitting vaporizer/voltage combination. Predictions for these compounds also exceeded the 8-h REL in several bars when less intense vaping conditions were considered. Benzene concentrations in a few bars approached the 8-h REL, and diacetyl levels were close to the lower limit for occupational exposures. The integrated health damage from passive vaping was derived by computing disability-adjusted life years (DALYs) lost due to exposure to secondhand vapor. Acrolein was the dominant contributor to the aggregate harm. DALYs for the various device/voltage combinations were lower than—or comparable to—those estimated for exposures to secondhand and thirdhand tobacco smoke.

Journal

Environmental Science & Technology

Volume

51

Year of Publication

2017

Issue

16

Organization

Sustainable Energy Department, Indoor Environment Group, Energy Technologies Area

Research Areas

IEG Smoking and Vaping, EAEI Healthy & Efficient Buildings

Related Files

PDF (434.79 KB) (link is external)

        

©2025 Energy Technologies Area, Berkeley Lab
Lawrence Berkeley National Laboratory (link is external)
  • twitter(link is external)
  • instagram(link is external)
  • LinkedIn(link is external)
  • facebook(link is external)
  • youtube(link is external)
  • DOE logo
  • UC logo
A U.S. Department of Energy National Laboratory Managed by the University of California
Questions & Comments(link is external) Privacy & Security Notice(link is external)